QSFP-40G-BD-RX

Cisco QSFP40G BiDi-Monitor Short-reach Transceiver For Data Broker
BUY NOW
  • Overview
  • Specifications
  • Datasheet
  • Ordering Information

Product Overview

The Cisco 40GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 40 Gigabit Ethernet connectivity options for data center, high-performance computing 00networks, enterprise core and distribution layers, and service provider applications.

Features and benefits of Cisco QSFP modules

  • Hot-swappable input/output device that plugs into a 40 Gigabit Ethernet Cisco QSFP port
  • Interoperable with other IEEE-compliant 40GBASE interfaces where applicable
  • Certified and tested on Cisco QSFP 40G ports for superior performance, quality, and reliability
  • High-speed electrical interface compliant to the IEEE 802.3ba standard
  • QSFP Form factor, 2-wire I2C communication interface and other low-speed electrical interface compliant to SFF 8436 and QSFP Multisource Agreement (MSA)

Cisco QSFP-40G-SR4-S (S-Class)

The S-Class Cisco 40GBASE-SR4-S QSFP module supports link lengths of 100 and 150 meters, respectively, on laser-optimized OM3, and OM4/OM5 multimode fibers. QSFP-40G-SR4-S is aligned to IEEE 40GBASE-SR4 optical specifications which support high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. Because the QSFP-40G-SR4-S does not support 4x10G breakout connectivity, see QSFP-40G-SR4 or QSFP-40G-CSR4 for such applications. QSFP-40G-SR4-S does not support FCoE.

Cisco QSFP-40G-SR4

  • The Cisco 40GBASE-SR4 QSFP Modules support link lengths of 100 meters and 150 meters, respectively, on laser-optimized OM3, and OM4/OM5 multimode fibers. It primarily enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. It can also be used in a 4x10G breakout mode for interoperability with 10GBASE-SR and SFP-10/25G-CSR-S (in 10G mode) interfaces up to 100 and 150 meters on OM3, and OM4/OM5 fibers, respectively. The worry-free 4x10G mode operation is enabled by the optimization of the transmit and receive optical characteristics of the Cisco QSFP-40G-SR4 to prevent receiver overload or unnecessary triggering of alarm thresholds on the 10GBASE-SR and SFP-10/25G-CSR-S (in 10G mode) receiver, and at the same time is completely interoperable with all standard 40GBASE-SR4 interfaces.
  • The 4x10G connectivity is achieved using an external 12-fiber parallel to 2-fiber duplex breakout cable, which connects the 40GBASE-SR4 module to four 10GBASE-SR optical interfaces. Cisco QSFP-40G-SR4 is optimized to guarantee interoperability with any IEEE 40GBASE-SR4 and in 4x10G mode with the 10GBASE-SR and SFP-10/25G-CSR (in10G mode).

Cisco QSFP-40G-SR-BD (40G BiDi)

  • The Cisco QSFP 40-Gbps BiDirectional (BiDi) transceiver (Figure 1) is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using MultiMode Fiber (MMF). The Cisco QSFP 40-Gbps BiDi transceiver offers customers a compelling solution that enables reuse of their existing 10 gigabit duplex MMF infrastructure for migration to 40 Gigabit Ethernet connectivity.
  • The Cisco QSFP 40-Gbps BiDi transceiver supports link lengths of 100 and 150 meters on laser-optimized OM3, and OM4/OM5 multimode fibers, respectively.
  • The Cisco BiDi transceiver complies with the QSFP MSA specification, enabling customers to use it on all QSFP 40-Gbps platforms to achieve high-density 40 Gigabit Ethernet networks.
  • Each Cisco QSFP 40-Gbps BiDi transceiver consists of two 20-Gbps transmit and receive channels in the 832-918 nanometer wavelength range, enabling an aggregated 40-Gbps link over a two-strand multimode fiber connection.

Cisco QSFP-40G-BD-RX

The Cisco QSFP 40-Gbps BiDi monitor is a pluggable optical module for use with link monitor hardware, such as the Cisco Nexus® Data Broker. Like the QSFP BiDi transceiver, it has a duplex MMF LC connector interface. The QSFP BiDi monitor is used only in the monitoring path of a link containing a passive optical tap splitter. The Cisco QSFP monitor offers the same specifications as the QSFP BiDi Transceiver, except that it does not transmit any signal, and thus eliminates the risk of interfering with the live BiDi link path.

Cisco FET-40G

Cisco FET-40G QSFP Modules are fabric-extender transceiver modules used to connect to fabric links (links between the fabric extender switch and the parent switch). The interconnect works over parallel multimode fiber across distances of up to 100 and 150 meters, respectively, on laser-optimized OM3, and OM4/OM5 multimode fiber cables. This module can be used for native 40G optical links over 12-fiber ribbon cables with MPO/MTP connectors or in 4x10G mode with parallel-to-duplex fiber breakout cables for connectivity to four FET-10G interfaces.

Cisco QSFP-40G-CSR-S (S-Class)

The QSFP-40G-CSR-S is a pluggable optical transceiver with a duplex LC connector interface used for connectivity using MultiMode Fiber (MMF). The Cisco 40GBASE-CSR Modules support link lengths of 300, 400 meters, and 440m respectively, on laser-optimized OM3, OM4 and OM5 multimode fibers. Customers benefit through the reuse of their existing 10 gigabit duplex MMF infrastructure as they migrate to 40 Gigabit Ethernet, while maintaining the same supported link distances as 10G Ethernet on OM3 and OM4. Additionally customers can benefit from improved reach on OM5. Each QSFP-40G-CSR-S operates at four different wavelengths. Each of the four wavelengths operates at 10G over existing duplex multimode fiber using standard LC connectors. The Cisco QSFP-40G-CSR-S transceiver does not support FCoE.

Cisco QSFP-40G-CSR4

Cisco 40GBASE-CSR4 QSFP Modules extend the reach of the IEEE 40GBASE-SR4 interface to 300 and 400 meters on laser-optimized OM3, and OM4/OM5 multimode parallel fiber, respectively. Each 10-gigabit lane of this module is compliant to IEEE 10GBASE-SR specifications. This module can be used for native 40G optical links over 12-fiber parallel cables with MPO/MTP female connectors or in a 4x10G breakout mode with parallel to duplex fiber breakout cables for connectivity to four 10GBASE-SR interfaces. Cisco QSFP-40G-CSR4 is optimized to guarantee interoperability over the complete specification range of 10GBASE-SR.

Cisco WSP-Q40GLR4L (QSFP-LR4-Lite)

The Cisco WSP-Q40GLR4L QSFP module supports link lengths of up to 2 kilometers over a standard pair of G.652 Single-Mode Fiber (SMF) with duplex LC connectors. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. It is interoperable with 40GBASE-LR4 for distances up to 2 kilometers. The operating temperature range is from +10 to +60°C with an optical link budget of 4 decibels. This 4-decibel link budget offers the ability to support the loss from patch panels in the link in a data center environment.

Cisco QSFP-40G-LR4-S (S-Class)

The Cisco 40GBASE-LR4 QSFP module supports link lengths of up to 10 kilometer over a standard pair of G.652 single-mode fiber with duplex LC connectors. The QSFP-40G-LR4-S module supports 40GBASE Ethernet rate only. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed in the device. QSFP-40G-LR4-S does not support FCoE.

Cisco QSFP-40G-LR4

The Cisco 40GBASE-LR4 QSFP module supports link lengths of up to 10 kilometers over a standard pair of G.652 single-mode fiber with duplex LC connectors. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.

Cisco QSFP-4X10G-LR-S (S-Class)

  • The Cisco QSFP-4X10G-LR-S QSFP module supports link lengths of up to 10km on G.652 Single-Mode Fiber (SMF). It enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. It can also be used in a 4x10G mode for interoperability with 10GBASE-LR interfaces up to 10km.
  • The 4x10G connectivity is achieved using an external 12-fiber parallel to 2-fiber duplex breakout cable, which connects the 4x10G LR module to four 10GBASE-LR optical interfaces. Cisco’s QSFP-4X10G-LR-S is optimized to guarantee interoperability in 4x10G mode over the full specification range of 10GBASE-LR and the SFP-10/25G-LR-S (in 10G mode). QSFP-4X10G-LR-S does not support FCoE.

Cisco QSFP-40G-ER4

The Cisco 40GBASE-ER4 QSFP Module supports link lengths up to 40km over G.652 single-mode fiber with duplex LC connectors. The 40GE or OTU3 signal is carried over four wavelengths in the 1310nm range. Multiplexing and demultiplexing of the four wavelengths are managed within the device.




Table 1.   QSFP Port cabling specifications

Cisco QSFP

Wavelength (nm)

Cable type

Core size (Microns)

Modal bandwidth (MHz*km)

Cable distance

Power consumption (W)

Pull tab color

QSFP-40G-SR4-S

850

MMF

50.0

50.0

2000 (OM3)

4700 (OM4/OM5)

100m

150m

1.5

Beige

QSFP-40G-SR4

850

MMF

50.0

50.0

50.0

500 (OM2)

2000 (OM3)

4700 (OM4/OM5)

30m

100m

150m

1.5

Beige

QSFP-40G-SR-BD

832 – 918

MMF

50.0

50.0

50.0

500 (OM2)

2000 (OM3)

4700 (OM4/OM5)

30m

100m

150m

3.5

Gray

QSFP-40G-BD-RX

832 – 918

MMF

50.0

50.0

50.0

500 (OM2)

2000 (OM3)

4700 (OM4/OM5)

30m

100m

150m

3.5

Beige

(or Gray with “Rx” mark)

FET-40G

850

MMF

50.0

50.0

50.0

500 (OM2)

2000 (OM3)

4700 (OM4/OM5)

30m

100m

150m

1.5

Brown

QSFP-40G-CSR-S

850

MMF

50.0

2000 (OM3)

4700 (OM4)

4700 (OM5)

300m

400m

440m

3.5

Orange

QSFP-40G-CSR4

850

MMF

50.0

50.0

50.0

500 (OM2)

2000 (OM3)

4700 (OM4/OM5)

82m

300m

400m

1.5

Orange

WSP-Q40GLR4L

1310

SMF

G.652

–

2km

3.5

Yellow

QSFP-40G-LR4-S

1310

SMF

G.652

–

10km

3.5

Blue

QSFP-40G-LR4

1310

SMF

G.652

–

10km

3.5

Blue

QSFP-4X10G-LR-S

1310

SMF

G.652

–

10km

3.5

Blue

QSFP-40G-ER4

1310

SMF

G.652

–

40km*4

3.5

Red




QSFP-40G-BD-RX

Table 1.   Cisco 40G QSFP Optics Modules

Part ID

Product description

QSFP-40G-SR4-S

Cisco 40GBASE-SR4 QSFP Module for MMF, Does not support 4x10G breakout mode. 

QSFP-40G-SR4

Cisco 40GBASE-SR4 QSFP Module for MMF, Support 4x10G breakout mode.

QSFP-40G-SR-BD

Cisco 40GBASE-SR Bi-Directional QSFP Module for Duplex MMF

QSFP-40G-BD-RX

Cisco 40GBASE-SR Bi-Directional QSFP Monitor Module for Duplex MMF

FET-40G

Cisco Fabric Extender Transceiver

QSFP-40G-CSR-S

Cisco 40GBASE-CSR QSFP Module for Duplex MMF

QSFP-40G-CSR4

Cisco 40GBASE-CSR4 QSFP Module for MMF

WSP-Q40GLR4L

Cisco 40GBASE-LR4L QSFP Module for SMF

QSFP-40G-LR4-S

Cisco 40GBASE-LR4 QSFP Module for SMF

QSFP-40G-LR4

Cisco 40GBASE-LR4 QSFP Module for SMF with OTU-3 data-rate support

QSFP-4X10G-LR-S

Cisco 4x10GBASE-LR QSFP Modules for SMF

QSFP-40G-ER4

Cisco 40GBASE-ER4 Module for SMF with OTU-3 data-rate support

 

Table 2.   Cisco 40G QSFP Direct-Attach Copper Modules

Part ID

Product description

QSFP-H40G-CU0-5M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 0.5-meter, passive

QSFP-H40G-CU1M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 1-meter, passive

QSFP-H40G-CU2M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 2-meter, passive

QSFP-H40G-CU3M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 3-meter, passive

QSFP-H40G-CU4M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 4-meter, passive

QSFP-H40G-CU5M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 5-meter, passive

QSFP-H40G-ACU7M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 7-meter, active

QSFP-H40G-ACU10M

Cisco 40GBASE-CR4 QSFP direct-attach copper cable, 10-meter, active

QSFP-4SFP10-CU0-5

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 1/2-meter, passive

QSFP-4SFP10G-CU1M

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 1-meter, passive

QSFP-4SFP10G-CU2M

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 2-meter, passive

QSFP-4SFP10G-CU3M

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 3-meter, passive

QSFP-4SFP10G-CU4M

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 4-meter, passive

QSFP-4SFP10G-CU5M

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 5-meter, passive

QSFP-4X10G-AC7M

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 7-meter, active

QSFP-4X10G-AC10M

Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 10-meter, active

QSFP-H40G-AOC1M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 1-meter

QSFP-H40G-AOC2M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 2-meter

QSFP-H40G-AOC3M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 3-meter

QSFP-H40G-AOC5M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 5-meter

QSFP-H40G-AOC7M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 7-meter

QSFP-H40G-AOC10M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 10-meter

QSFP-H40G-AOC15M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 15-meter

QSFP-H40G-AOC20M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 20-meter

QSFP-H40G-AOC25M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 25-meter

QSFP-H40G-AOC30M

Cisco 40GBase-AOC QSFP direct-attach Active Optical Cable, 30-meter

QSFP-4X10G-AOC1M

Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 1-meter

QSFP-4X10G-AOC2M

Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 2-meter

QSFP-4X10G-AOC3M

Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 3-meter

QSFP-4X10G-AOC5M

Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 5-meter

QSFP-4X10G-AOC7M

Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 7-meter

QSFP-4X10G-AOC10M

Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 10-meter




Get A Quote

Related Products