SFP-10G-BX40U-I

Cisco SFP+ Bidirectional for 40km, upstream
BUY NOW
  • Overview
  • Specifications
  • Datasheet
  • Ordering Information

Product Overview

The Cisco 10GBASE SFP+ modules give you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.

Features and benefits

  • Industry’s smallest 10G form factor for greatest density per chassis
  • Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
  • Supports “pay-as-you-populate” model for investment protection and ease of technology migration
  • Digital optical monitoring capability for strong diagnostic capabilities
  • Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
  • Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco

Cisco SFP-10G-T-X module

The Cisco 10GBASE-T module offers connectivity options at the following data rates: 100M/1G/10Gbps. It has the SFP+ form factor and an RJ-45 interface so that CAT5e/CAT6A/CAT7 cables can be used to connect to end points with embedded 10GBASE-T ports. They are suitable for distances up to 30 meters and offers a cost-effective way to connect within racks and across adjacent racks.

Cisco SFP-10G-SR-S module (S-Class)

The Cisco 10GBASE-SR module supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400 meter link lengths are possible. SFP-10G-SR-S does not support FCoE.

Cisco SFP-10G-SR module

The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-SR-X module

The Cisco SFP-10G-SR-X is a multirate 10GBASE-SR, 10GBASE-SW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-SR-I module

The Cisco SFP-10G-SR-I is a multirate 10GBASE-SR, 10GBASE-SW and OTU2/2e module for industrial operating temperature range. This module also supports CPRI datarate options 3, 4, 5, 6, 7, 7a, 8. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF(OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-LRM module

  • The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade Multimode Fiber (MMF). To make sure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3 or OM4.
  • The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard Single-Mode Fiber (SMF, G.652).

Cisco FET-10G module

The Cisco FET-10G Fabric Extender Transceiver supports link lengths up to 100m on laser-optimized OM3 or OM4 multimode fiber. It is supported on fabric links from a Nexus 2000 to a Cisco parent switch only. Note this product is not orderable individually.

Cisco SFP-10G-LR-S module (S-Class)

The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) (G.652). SFP-10G-LR-S does not support FCoE.

Cisco SFP-10G-LR module

The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652).

Cisco SFP-10G-LR-X module

The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652).

Cisco SFP-10G-LR10-I module

The Cisco SFP-10G-LR10-I supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652). The SFP-10G-LR10-I is for industrial operating temperature range. The SFP-10G-LR10-I also supports CPRI datrates options 3, 4, 5, 6, 7, 7a, 8.

Cisco SFP-10G-BXD-I and SFP-10G-BXU-I for 10Km (single-fiber bidirectional applications)

  • The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.
  • A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.
  • The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices, as depicted in Figure 3. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. Note in Figure 3 the presence of a Wavelength-Division Multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths. This module also supports CPRI datarate options 3, 4, 5, 6, 7, 7a, 8.*
  • The SFP-10G-BXD-I and SFP-10G-BXU-I SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Cisco SFP-10G-ER-S module (S-Class)

The Cisco 10GBASE-ER module supports a link length of up to 40 kilometers on SMF (G.652). SFP-10G-ER-S does not support FCoE.

Cisco SFP-10G-ER module

The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard Single-Mode Fiber (SMF, G.652).

Cisco SFP-10G-ER-I module

The Cisco 10GBASE-ER Industrial Temperature Module supports a link length of up to 40 kilometers on standard Single-Mode Fiber (SMF, G.652). The SFP-10G-ER-I for Industrial Operating Temperature Range is a multirate 10GBASE-ER, 10GBASE-EW and OTU2/2e module.

Cisco SFP-10G-BX40D-I and SFP-10G-BX40U-I (for 40Km single-fiber bidirectional applications)

  • The Cisco SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs operate on a single strand of standard SMF.
  • A SFP-10G-BX40D-I device is always connected to a SFP-10G-BX40U-I device with a single strand of standard SMF with an operating transmission range up to 40 km.
  • The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BX40D-I transmits a 1330-nm channel and receives a 1270-nm signal. The SFP-10G-BX40U-I transmits at a 1270-nm wavelength and receives a 1330-nm signal.
  • The SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Cisco SFP-10G-ZR-S module (S-Class)

The Cisco 10GBASE-ZR module supports link lengths of up to about 80 kilometers on standard SMF (G.652). This interface is not specified as part of the 10 Gigabit Ethernet standards and is, instead, built according to Cisco specifications. SFP-10G-ZR-S does not support FCoE.

Cisco SFP-10G-ZR module

The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard Single-Mode Fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

Cisco SFP-10G-ZR-I module

The Cisco SFP-10G-ZR-I is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module for industrial operating temperature range. The SFP-10G-ZR-I has a limiting electrical interface receiver, which does not require EDC PHY on the host board, it can be plugged into any SFP+ port. It supports link lengths of up to 70 kilometers on standard Single-Mode Fiber (SMF, G.652), assuming a fiber chromatic dispersion of 20 ps/(nm*km). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications. The SFP-10G-ZR-I has a cold start at -40⁰C; the transceiver will be operational except optical traffic is not supported from -40⁰ to -28⁰C, all other low speed features (DOM, I2C, etc.) are operational. The module is fully operational from -28⁰C to 85⁰C.



Table 1.   Optical transmit and receive specifications

Product

Type

Transmit Power (dBm)*

Receive Power (dBm)*

Transmit and Receive Wavelength (nm)

Maximum

Minimum

Maximum

Minimum

SFP-10G-SR-S

SFP-10G-SR

10GBASE-SR 850nm MMF

-1.2**

-7.3

-1.0

-9.9

840 to 860

SFP-10G-SR-X

SFP-10G-SR-I

10GBASE-SR, 10GBASE-SW and OTU2e 850nm MMF

-1.2**

-7.3

-1.0

-9.9

840 to 860

SFP-10G-LRM

10GBASE-LRM 1310nm MMF and SMF

0.5

-6.5

0.5

-8.4 (in average)

-6.4 (in OMA)***

1260 to 1355

FET-10G

FET-10G 850nm MMF

-1.3

-8

-1

-9.9

840 to 860

SFP-10G-LR-S

SFP-10G-LR

10GBASE-LR 1310nm SMF

0.5

-8.2

0.5

-14.4

1260 to 1355

SFP-10G-LR-X

10GBASE-LR, 10GBASE-LW and OTU2e 1310nm SMF

0.5

-8.2

0.5

-14.4

1260 to 1355

SFP-10G-LR10-I

10GBASE-LR, CPRI 1310 SMF

0.5

-8.2

0.5

-14.4

1260 to 1355

SFP-10G-BXD-I

10G-SFP Bidirectional for 10km

0.5

-8.2

0.5

-14.4

1320 to 1340 (Tx)

1260 to 1280 (Rx)

SFP-10G-BXU-I

10G-SFP Bidirectional for 10km

0.5

-8.2

0.5

-14.4

1260 to 1280 (Tx)

1320 to 1340 (Rx)

SFP-10G-ER-S

SFP-10G-ER

SFP-10G-ER-I

10GBASE-ER 1550nm SMF

4.0

-4.7

-1

-15.8

1530 to 1565

SFP-10G-BX40D-I

10G-SFP Bidirectional for 40km

4.5

-2.7

-9

-21.2

1320 to 1340 (Tx)

1260 to 1280 (Rx)

SFP-10G-BX40U-I

10G-SFP Bidirectional for 40km

4.5

-2.7

-9

-21.2

1260 to 1280 (Tx)

1320 to 1340 (Rx)

SFP-10G-ZR-S

SFP-10G-ZR

SFP-10G-ZR-I

10GBASE-ZR 1550nm SMF

4.0

0

-7

-24

1530 to 1565



SFP-10G-BX40U-I

Table 1.   Cisco 10G cables and transceivers

Part ID

Product description

SFP-10G-T-X

10GBASE-T SFP+ Module for CAT6A cables (up to 30 meters)

SFP-10G-SR-S

10GBASE-SR SFP+ Module for MMF S-Class

SFP-10G-SR

10GBASE-SR SFP+ Module for MMF

SFP-10G-SR-X

Multirate 10GBASE-SR, 10GBASE-SW and OTU2e SFP+ Module for MMF, extended temperature range

SFP-10G-SR-I

Multirate 10GBASE-SR, 10GBASE-SW and OTU2e SFP+ Module for MMF, industrial temperature range

SFP-10G-LRM

10GBASE-LRM SFP+ Module for MMF and SMF

SFP-10G-LR-S

10GBASE-LR SFP+ Module for SMF S-Class

SFP-10G-LR

10GBASE-LR SFP+ Module for SMF

SFP-10G-LR-X

Multirate 10GBASE-LR, 10GBASE-LW and OTU2e SFP+ Module for SMF, extended temperature range

SFP-10G-LR10-I

Multirate 10GBASE-LR, CPRI 3-8, Industrial Temperature Module

SFP-10G-BXD-I

10GBASE-BX10-D Bidirectional for 10km

SFP-10G-BXU-I

10GBASE-BX10-U Bidirectional for 10km

SFP-10G-ER-S

10GBASE-ER SFP+ Module for SMF S-Class

SFP-10G-ER

10GBASE-ER SFP+ Module for SMF

SFP-10G-ER-I

Multirate 10GBASE-ER, 10GBASE-EW and OTU2e SFP+ Module for SMF, Industrial Temperature range

SFP-10G-BX40D-I

10GBASE-BX40-D Bidirectional for 40km

SFP-10G-BX40U-I

10GBASE-BX40-U Bidirectional for 40km

SFP-10G-ZR-S

10GBASE-ZR SFP+ Module for SMF S-Class

SFP-10G-ZR

Multirate 10GBASE-ZR, 10GBASE-ZW and OTU2e SFP+ Module for SMF

SFP-10G-ZR-I

Multirate 10GBASE-ZR, 10GBASE-ZW and OTU2e SFP+ Module for SMF

SFP-H10GB-CU1M

10GBASE-CU SFP+ Cable 1 Meter, passive

SFP-H10GB-CU1-5M

10GBASE-CU SFP+ Cable 1.5 Meter, passive

SFP-H10GB-CU2M

10GBASE-CU SFP+ Cable 2 Meter, Passive

SFP-H10GB-CU2-5M

10GBASE-CU SFP+ Cable 2.5 Meter, Passive

SFP-H10GB-CU3M

10GBASE-CU SFP+ Cable 3 Meter, passive

SFP-H10GB-CU4M

10GBASE-CU SFP+ Cable 4 Meter, passive

SFP-H10GB-CU5M

10GBASE-CU SFP+ Cable 5 Meter, passive

SFP-H10GB-ACU7M

10GBASE-CU SFP+ Cable 7 Meter, active

SFP-H10GB-ACU10M

10GBASE-CU SFP+ Cable 10 Meter, active

SFP-10G-AOC1M

10GBASE-AOC SFP+ Cable 1 Meter

SFP-10G-AOC2M

10GBASE-AOC SFP+ Cable 2 Meter

SFP-10G-AOC3M

10GBASE-AOC SFP+ Cable 3 Meter

SFP-10G-AOC5M

10GBASE-AOC SFP+ Cable 5 Meter

SFP-10G-AOC7M

10GBASE-AOC SFP+ Cable 7 Meter

SFP-10G-AOC10M

10GBASE-AOC SFP+ Cable 10 Meter



Get A Quote

Related Products