AP-655

Our most powerful Wi-Fi 6E indoor access point Up to 7.8 Gbps combined peak datarate High availability with configurable 5 Gbps dual Ethernet ports
  • Overview
  • Specifications
  • Datasheet
  • Ordering Information

Product Overview

The 650 Series APs are indoor access points that are fully equipped to support the 6 GHz band for faster performance, wider channels, and minimal interference. Our flagship campus Wi-Fi 6E APs deliver 7.8 Gbps maximum aggregate data rates and 4×4 MU-MIMO.

Maximize channel utilization

HPE Aruba Networking’s patented ultra tri-band filtering allows organizations to take full advantage of 6GHz unlicensed spectrum by dynamically adjusting the available channels to eliminate signal interference and performance degradation.

Highly efficient and secure

Wi-Fi 6E extends the 802.11ax standard to the 6GHz band. All the efficiency and security enhancements including orthogonal frequency-division multiple access (OFDMA), Multi-User MIMO, Enhanced Open, and WPA3 are supported.

IoT ready

Integrated Bluetooth Low Energy (BLE) and Zigbee support make it easier to deploy and manage IoT, including asset tracking, security solutions, and sensors.

Features

HPE Aruba Networking 650 Series APs take advantage of the 6 GHz band for fast, secure connectivity plus configurable 5 Gbps dual Ethernet ports for high availability.

Highly resilient

Provide hitless failover for data and power with two configurable HPE Smart Rate ethernet ports that can support 1, 2.5, or 5 Gbps.

Secure connectivity

Supports WPA3 and Enhanced Open as part of the Wi-Fi 6E standard for stronger guest access and data encryption.

Automatic role-based access enforcement

Centrally configure and automatically enforce role-based policies across wired and wireless networks.

Dynamic traffic steering

Load balance traffic for better performance by automatically steering traffic from the 2.4 GHz band to the preferred 5 GHz or 6 GHz band.


Hardware variants

AP-654: External antenna models

AP-655: Internal antenna models

Wi-Fi radio specifications

  • AP type: Indoor, tri-radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 4×4 MIMO

  • 2.4GHz radio: Four spatial streams MIMO for up to 1,147Mbps wireless data rate with HE40 802.11ax client devices

  • 5GHz radio: Four spatial streams MIMO for up to 2.4Gbps wireless data rate with HE80 802.11ax client devices

  • 6GHz radio: Four spatial streams MIMO for up to 4.8Gbps wireless data rate with HE160 802.11ax client devices

  • Both downlink and uplink MU-MIMO in 6GHz and 5GHz, downlink only in 2.4GHz

  • Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 4 for the 6GHz radio)

  • Supported frequency bands (country-specific restrictions apply):

  • 400 to 2.4835GHz ISM

  • 150 to 5.250GHz U-NII-1

  • 250 to 5.350GHz U-NII-2A

  • 470 to 5.725GHz U-NII-2C

  • 725 to 5.850GHz U-NII-3/ISM

  • 850 to 5.895GHz U-NII-4

  • 925 to 6.425GHz U-NII-5

  • 425 to 6.525GHz U-NII-6

  • 525 to 6.875GHz U-NII-7

  • 875 to 7.125GHz U-NII-8

  • Available bands and channels: Dependent on configured regulatory domain (country)

  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5GHz band

  • Including Zero-Wait DFS (ZWDFS) to accelerate channel changes

  • Supported radio technologies:

  • 11b: Direct-sequence spread-spectrum (DSSS)

  • 11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

  • 11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 37 resource units (for an 80MHz channel)

  • Supported modulation types:

  • 11b: BPSK, QPSK, CCK

  • 11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM (proprietary extension)

  • 11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension)

  • 11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM

  • 802.11n high-throughput (HT) support: HT20/40

  • 802.11ac very high throughput (VHT) support: VHT20/40/80/160(80+80)

  • 802.11ax high efficiency (HE) support: HE20/40/80/160

  • Supported data rates (Mbps):

  • 11b: 1, 2, 5.5, 11

  • 11a/g: 6, 9, 12, 18, 24, 36, 48, 54

  • 11n: 6.5 to 600 (MCS0 to MCS31, HT20 to HT40), 800 with 256-QAM (proprietary extension)

  • 11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160(80+80));VHT80); 2,167 with 1024-QAM (MCS10 and MCS11, proprietary extension)

  • 11ax (2.4GHz): 3.6 to 1,147 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE40)

  • 11ax (5GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160(80+80))HE80)

  • 11ax (6GHz): 3.6 to 4,804 (MCS0 to MCS11, NSS = 1 to 4,HE20 to HE160)

  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU

  • Transmit power: Configurable in increments of 0.5 dBm

  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

  • Per radio/band (2.4GHz / 5GHz / 6GHz): +24 dBm (18dBm per chain)

  • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.

  • Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks

  • Ultra Tri-Band (UTB) enables ultimate flexibility in 5GHz and 6GHz channel selection without performance degradation

  • Maximum ratio combining (MRC) for improved receiver performance

  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance

  • Space-time block coding (STBC) for increased range and improved reception

  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

  • Transmit beam-forming (TxBF) for increased signal reliability and range

  • 802.11ax Target Wait Time (TWT) to support low-power client devices


Table 1.   HPE Aruba 650 Series Wi-Fi 6E Access Points

Part number

Description

Internal antenna access points

R7J35A

HPE Aruba Networking AP-655 (EG) Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J36A

HPE Aruba Networking AP-655 (IL) Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J37A

HPE Aruba Networking AP-655 (JP) Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J38A

HPE Aruba Networking AP-655 (RW) Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J39A

HPE Aruba Networking AP-655 (US) Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

External antenna access points

S1G53A

HPE Aruba Networking AP-654-RW Tri-radio 4×4:4 Wi-Fi 6E External Antennas Campus AP

S1G54A

HPE Aruba Networking AP-654-US Tri-radio 4×4:4 Wi-Fi 6E External Antennas Campus AP

Internal antenna access points – TAA models

R7J40A

HPE Aruba Networking AP-655 (EG) TAA Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J41A

HPE Aruba Networking AP-655 (IL) TAA Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J42A

HPE Aruba Networking AP-655 (JP) TAA Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J43A

HPE Aruba Networking AP-655 (RW) TAA Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

R7J44A

HPE Aruba Networking AP-655 (US) TAA Tri-radio 4×4:4 802.11ax Wi-Fi 6E Internal Antennas Campus AP

External antenna access points – TAA models

S1G55A

HPE Aruba Networking AP-654-RWF1 TAA Tri-radio 4×4:4 Wi-Fi 6E External Antennas Campus AP

S1G56A

HPE Aruba Networking AP-654-USF1 TAA Tri-radio 4×4:4 Wi-Fi 6E External Antennas Campus AP

*For compatible accessories, see the 650 Series Ordering Guide.


Get A Quote

Related Products