Product Overview
HPE Aruba Networking 600H Series Hospitality Access Points, High performance Wi-Fi 6E APs for hospitality, branch offices, and teleworker deployments. Delivering fast, secure, and reliable Wi-Fi 6E and wired connectivity for mission-critical work.
Increase Wi-Fi performance
Get better Wi-Fi performance with the 600H Series APs that take advantage of the 6 GHz band for faster speeds and wider channels. Delivers up to 3.6 Gbps combined peak data rate (using the 5 GHz and 6 GHz bands) to better support high-bandwidth, low-latency applications such as high-definition video.
Boost security and efficiency
Wi-Fi 6E extends the 802.11ax standard to the 6GHz band including all the efficiency and security enhancements such as orthogonal frequency-division multiple access (OFDMA), multi-user MIMO, enhanced open, and WPA3. The 600H Series APs also offer client optimization, automated radio frequency management, and intelligent power monitoring.
Optimize connectivity
Improve user and device experience with configurable dual radios that support any two of three Wi-Fi 6E bands (2.4, 5, and 6 GHz) and provide full Wi-Fi 6E coverage in a multi-AP environment. Flexible desktop or wall mount options with 2.5 Gbps and 1 Gbps ports, PoE support, and integrated Bluetooth and Zigbee radio support.
IoT ready
Simplify with APs that can act as IoT transport platforms, eliminating the need to deploy or manage overlay gateways. Integrated Bluetooth and Zigbee radio support make it easier to deploy and manage IoT, including asset tracking services, security solutions, and sensors.
Features
Wi-Fi 6E for more wireless capacity, Ideal for hospitality, small branch, and remote work environments, 600H Series APs deliver fast, secure connectivity.
6 GHz support
Maximum combined 3.6 Gbps peak data rate for higher throughput and faster speeds indoors (when using 5 GHz and 6 GHz bands).
Configurable dual radios
Support any two of three Wi-Fi 6E bands (2.4, 5, and 6 GHz) and provide full Wi-Fi 6E coverage in a multi-AP environment.
PoE and wired connectivity
2.5 Gbps uplink, two 1 GbE ports, and two 1 GbE PSE ports capable of supplying up to total of 30W PoE.
IoT-ready Bluetooth and Zigbee support
Simplifies deploying and managing IoT location services, asset-tracking services, security solutions, and IoT sensors.
Compact and flexible form factor
Wall mount or choose desktop bundle with AP, desk stand, power adapter, and power cord.
Built-in security
Includes Wi-Fi 6E standards such as WPA3, enhanced open, and WPA2-MPSK for stronger encryption and authentication.
Hardware variants
Wi-Fi radio specifications
AP type: Indoor, tri‑band, 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2×2 MIMO
2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices (287Mbps for HE20)
5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices
6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devices
Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 8 for the 6GHz radio)
Supported frequency bands (country‑specific restrictions apply):
Available bands and channels: Dependent on configured regulatory domain (country)
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5GHz band
Supported radio technologies:
Supported modulation types:
802.11n high-throughput (HT) support: HT20/40
802.11ac very high throughput (VHT) support: VHT20/40/80
802.11ax high efficiency (HE) support: HE20/40/80/160
Supported data rates (Mbps):
802.11n/ac packet aggregation: A-MPDU, A-MSDU
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
Minimum configurable transmit power is –10dBm (conducted, per chain)
Advanced cellular coexistence (ACC) minimizes the impact of interference from cellular networks
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Space-time block coding (STBC) for increased range and improved reception
Low‑density parity check (LDPC) for high‑efficiency error correction and increased throughput
Transmit beamforming (TxBF) for increased signal reliability and range
802.11ax target wait time (TWT) to support low-power client devices
802.11mc fine timing measurement (FTM) for precision distance ranging
Table 1. HPE Aruba 600H Series Hospitality Access Points
Part number | Description |
HPE Aruba Networking 600H Series Hospitality APs (mount kit not included) | |
S0B57A | HPE Aruba Networking AP-605H (EG) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB Hospitality AP |
S0B58A | HPE Aruba Networking AP-605H (IL) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB Hospitality AP |
S0B59A | HPE Aruba Networking AP-605H (JP) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB Hospitality AP |
S0B60A | HPE Aruba Networking AP-605H (RW) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB Hospitality AP |
S0B62A | HPE Aruba Networking AP-605H (US) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB Hospitality AP |
HPE Aruba Networking 600H Series Hospitality APs—Eco-friendly 10-packs | |
S1F95A | HPE Aruba Networking AP-605H (RW10) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB 10Pk Hospitality AP |
S1F96A | HPE Aruba Networking AP-605H (US10) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB 10Pk Hospitality AP |
HPE Aruba Networking 600H Series Hospitality APs—TAA | |
S0B61A | HPE Aruba Networking AP-605H (RWF1) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB TAA Hospitality AP |
S0B63A | HPE Aruba Networking AP-605H (USF1) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB TAA Hospitality AP |
HPE Aruba Networking 600H Series Hospitality APs—Remote AP bundles | |
S0B64A | HPE Aruba Networking AP-605HR (EU) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB Remote AP Bundle |
S0B65A | HPE Aruba Networking AP-605HR (US) 2-Radio 3-Band 2×2 Wi-Fi 6E 1+4 ETH PSE USB Remote AP Bundle |
HPE Aruba Networking 600H Series Mount kits | |
S0J42A | HPE Aruba Networking AP-600H-MNT1 Single-gang Wall-box Mount Kit |
S0J43A | HPE Aruba Networking AP-600H-MNT2 Dual-gang Wall-box Mount Kit |
S0J41A | HPE Aruba Networking AP-500H-MNTD2 RJ45 Ethernet Jack Desk Mount Kit |
